Configure Replication Zones

On this page

In CockroachDB, you use replication zones to control the number and location of replicas for specific sets of data, both when replicas are first added and when they are rebalanced to maintain cluster equilibrium. Initially, there is a single, default replication zone for the entire cluster. You can adjust this default zone as well as add zones for individual databases and tables as needed. For example, you might use the default zone to replicate most data in a cluster normally within a single datacenter, while creating a specific zone to more highly replicate a certain database or table across multiple datacenters and geographies.

This page explains how replication zones work and how to use the cockroach zone command to configure them.

Overview

Replication Zone Levels

There are three replication zone levels:

• Cluster: CockroachDB comes with a single, default replication zone for the entire cluster. See View the Default Replication Zone and Edit the Default Replication Zone for more details.
• Database: You can add replication zones for specific databases. See Create a Replication Zone for a Database for more details.
• Table: You can add replication zones for specific tables. See Create a Replication Zone for a Table for more details.

When replicating a piece of data, CockroachDB uses the most granular zone available: If there's a replication zone for the table containing the data, CockroachDB uses it; otherwise, it uses the replication zone for the database containing the data. If there's no applicable table or database replication zone, CockroachDB uses the cluster-wide replication zone.

In addition to the databases and tables that are visible via SQL, CockroachDB stores additional internal data in what are called system ranges. You can configure replication zones for parts of these internal data ranges if you'd like to override the cluster-wide settings. See Create a Replication Zone for System Ranges for more details.

Replication Zone Format

A replication zone is specified in YAML format and looks like this:

range_min_bytes: <size-in-bytes>
range_max_bytes: <size-in-bytes>
gc:
  ttlseconds: <time-in-seconds>
num_replicas: <number-of-replicas>
constraints: [comma-separated constraint list]

Replication Constraints

The location of replicas, both when they are first added and when they are rebalanced to maintain cluster equilibrium, is based on the interplay between descriptive attributes assigned to nodes and constraints set in zone configurations.

Descriptive Attributes Assigned to Nodes

When starting a node with the cockroach start command, you can assign the following types of descriptive attributes:

Constraints in Replication Zones

The node-level and store-level descriptive attributes mentioned above can be used as the following types of constraints in replication zones to influence the location of replicas. However, note the following general guidance:

• When locality is the only consideration for replication, it's recommended to set locality on nodes without specifying any constraints in zone configurations. In the absence of constraints, CockroachDB attempts to spread replicas evenly across the cluster based on locality.
• Required and prohibited constraints are useful in special situations where, for example, data must or must not be stored in a specific country or on a specific type of machine.

Node/Replica Recommendations

See Cluster Topography recommendations for production deployments.

Subcommands

Synopsis

# List all replication zones:
$ cockroach zone ls <flags>

# View the default replication zone for the cluster:
$ cockroach zone get .default <flags>

# View the replication zone for a database:
$ cockroach zone get <database> <flags>

# View the replication zone for a table:
$ cockroach zone get <database.table> <flags>

# Edit the default replication zone for the cluster:
$ cockroach zone set .default --file=<zone-content.yaml> <flags>

# Create/edit the replication zone for a database:
$ cockroach zone set <database> --file=<zone-conent.yaml> <flags>

# Create/edit the replication zone for a table:
$ cockroach zone set <database.table> --file=<zone-content.yaml> <flags>

# Remove the replication zone for a database:
$ cockroach zone rm <database> <flags>

# Remove the replication zone for a table:
$ cockroach zone rm <database.table> <flags>

# View help:
$ cockroach zone --help
$ cockroach zone ls --help
$ cockroach zone get --help
$ cockroach zone set --help
$ cockroach zone rm --help

Flags

The zone command and subcommands support the following general-use and logging flags.

General

Logging

By default, the zone command logs errors to stderr.

If you need to troubleshoot this command's behavior, you can change its logging behavior.

Basic Examples

These examples focus on the basic approach and syntax for working with zone configuration. For examples demonstrating how to use constraints, see Scenario-based Examples.

View the Default Replication Zone

The cluster-wide replication zone (.default) is initially set to replicate data to any three nodes in your cluster, with ranges in each replica splitting once they get larger than 67108864 bytes.

To view the default replication zone, use the cockroach zone get .default command with appropriate flags:

$ cockroach zone get .default --insecure

.default
range_min_bytes: 1048576
range_max_bytes: 67108864
gc:
  ttlseconds: 86400
num_replicas: 3
constraints: []

Edit the Default Replication Zone

To edit the default replication zone, create a YAML file defining only the values you want to change (other values will not be affected), and use the cockroach zone set .default -f <file.yaml> command with appropriate flags:

$ cat default_update.yaml

num_replicas: 5

$ cockroach zone set .default --insecure -f default_update.yaml

range_min_bytes: 1048576
range_max_bytes: 67108864
gc:
  ttlseconds: 86400
num_replicas: 5
constraints: []

Alternately, you can pass the YAML content via the standard input:

$ echo 'num_replicas: 5' | cockroach zone set .default --insecure -f -

Create a Replication Zone for a Database

To control replication for a specific database, create a YAML file defining only the values you want to change (other values will not be affected), and use the cockroach zone set <database> -f <file.yaml> command with appropriate flags:

$ cat database_zone.yaml

num_replicas: 7

$ cockroach zone set db1 --insecure -f database_zone.yaml

range_min_bytes: 1048576
range_max_bytes: 67108864
gc:
  ttlseconds: 86400
num_replicas: 5
constraints: []

Alternately, you can pass the YAML content via the standard input:

$ echo 'num_replicas: 5' | cockroach zone set db1 --insecure -f -

Create a Replication Zone for a Table

To control replication for a specific table, create a YAML file defining only the values you want to change (other values will not be affected), and use the cockroach zone set <database.table> -f <file.yaml> command with appropriate flags:

$ cat table_zone.yaml

num_replicas: 7

$ cockroach zone set db1.t1 --insecure -f table_zone.yaml

range_min_bytes: 1048576
range_max_bytes: 67108864
gc:
  ttlseconds: 86400
num_replicas: 7
constraints: []

Alternately, you can pass the YAML content via the standard input:

$ echo 'num_replicas: 7' | cockroach zone set db1.t1 --insecure -f -

Create a Replication Zone for System Ranges

In addition to the databases and tables that are visible via the SQL interface, CockroachDB stores additional data in what are called system ranges. There are three categories of system ranges for which replication zones can be set:

To control replication for one of the above sets of system ranges, create a YAML file defining only the values you want to change (other values will not be affected), and use the cockroach zone set <zone-name> -f <file.yaml> command with appropriate flags:

$ cat meta_zone.yaml

num_replicas: 7

$ cockroach zone set .meta --insecure -f meta_zone.yaml

range_min_bytes: 1048576
range_max_bytes: 67108864
gc:
  ttlseconds: 86400
num_replicas: 7
constraints: []

Alternately, you can pass the YAML content via the standard input:

$ echo 'num_replicas: 7' | cockroach zone set .meta --insecure -f -

Scenario-based Examples

Even Replication Across Datacenters

Scenario:

• You have 6 nodes across 3 datacenters, 2 nodes in each datacenter.
• You want data replicated 3 times, with replicas balanced evenly across all three datacenters.

Approach:

Start each node with its datacenter location specified in the --locality flag:

# Start the two nodes in datacenter 1:
$ cockroach start --insecure --host=<node1 hostname> --locality=datacenter=us-1
$ cockroach start --insecure --host=<node2 hostname> --locality=datacenter=us-1 \
--join=<node1 hostname>:26257

# Start the two nodes in datacenter 2:
$ cockroach start --insecure --host=<node3 hostname> --locality=datacenter=us-2 \
--join=<node1 hostname>:26257
$ cockroach start --insecure --host=<node4 hostname> --locality=datacenter=us-2 \
--join=<node1 hostname>:26257

# Start the two nodes in datacenter 3:
$ cockroach start --insecure --host=<node5 hostname> --locality=datacenter=us-3 \
--join=<node1 hostname>:26257
$ cockroach start --insecure --host=<node6 hostname> --locality=datacenter=us-3 \
--join=<node1 hostname>:26257

There's no need to make zone configuration changes; by default, the cluster is configured to replicate data three times, and even without explicit constraints, the cluster will aim to diversify replicas across node localities.

Multiple Applications Writing to Different Databases

Scenario:

• You have 2 independent applications connected to the same CockroachDB cluster, each application using a distinct database.
• You have 6 nodes across 2 datacenters, 3 nodes in each datacenter.
• You want the data for application 1 to be replicated 5 times, with replicas evenly balanced across both datacenters.
• You want the data for application 2 to be replicated 3 times, with all replicas in a single datacenter.

Approach:

1. Start each node with its datacenter location specified in the --locality flag:

   # Start the three nodes in datacenter 1:
   $ cockroach start --insecure --host=<node1 hostname> --locality=datacenter=us-1
   $ cockroach start --insecure --host=<node2 hostname> --locality=datacenter=us-1 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node3 hostname> --locality=datacenter=us-1 \
   --join=<node1 hostname>:26257
   
   # Start the three nodes in datacenter 2:
   $ cockroach start --insecure --host=<node4 hostname> --locality=datacenter=us-2 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node5 hostname> --locality=datacenter=us-2 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node6 hostname> --locality=datacenter=us-2 \
   --join=<node1 hostname>:26257
   

2. On any node, configure a replication zone for the database used by application 1:

   # Create a YAML file with the replica count set to 5:
   $ cat app1_zone.yaml
   

   num_replicas: 5
   

   # Apply the replication zone to the database used by application 1:
   $ cockroach zone set app1_db --insecure -f app1_zone.yaml
   

   range_min_bytes: 1048576
   range_max_bytes: 67108864
   gc:
     ttlseconds: 86400
   num_replicas: 5
   constraints: []
   

   Nothing else is necessary for application 1's data. Since all nodes specify their datacenter locality, the cluster will aim to balance the data in the database used by application 1 between datacenters 1 and 2.

3. On any node, configure a replication zone for the database used by application 2:

   # Create a YAML file with 1 datacenter as a required constraint:
   $ cat app2_zone.yaml
   

   constraints: [+datacenter=us-2]
   

   # Apply the replication zone to the database used by application 2:
   $ cockroach zone set app2_db --insecure -f app2_zone.yaml
   

   range_min_bytes: 1048576
   range_max_bytes: 67108864
   gc:
    ttlseconds: 86400
   num_replicas: 3
   constraints: [+datacenter=us-2]
   

   The required constraint will force application 2's data to be replicated only within the us-2 datacenter.

Stricter Replication for a Specific Table

Scenario:

• You have 7 nodes, 5 with SSD drives and 2 with HDD drives.
• You want data replicated 3 times by default.
• Speed and availability are important for a specific table that is queried very frequently, however, so you want the data in that table to be replicated 5 times, preferably on nodes with SSD drives.

Approach:

1. Start each node with ssd or hdd specified as store attributes:

   # Start the 5 nodes with SSD storage:
   $ cockroach start --insecure --host=<node1 hostname> --store=path=node1,attrs=ssd
   $ cockroach start --insecure --host=<node2 hostname> --store=path=node2,attrs=ssd \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node3 hostname> --store=path=node3,attrs=ssd \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node4 hostname> --store=path=node4,attrs=ssd \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node5 hostname> --store=path=node5,attrs=ssd \
   --join=<node1 hostname>:26257
   
   # Start the 2 nodes with HDD storage:
   $ cockroach start --insecure --host=<node6 hostname> --store=path=node6,attrs=hdd \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node7 hostname> --store=path=node2,attrs=hdd \
   --join=<node1 hostname>:26257
   

2. On any node, configure a replication zone for the table that must be replicated more strictly:

   # Create a YAML file with the replica count set to 5
   # and the ssd attribute as a required constraint:
   $ cat table_zone.yaml
   

   num_replicas: 5
   constraints: [+ssd]
   

   # Apply the replication zone to the table:
   $ cockroach zone set db.important_table --insecure -f table_zone.yaml
   

   range_min_bytes: 1048576
   range_max_bytes: 67108864
   gc:
    ttlseconds: 86400
   num_replicas: 5
   constraints: [+ssd]
   

   Data in the table will be replicated 5 times, and the required constraint will place data in the table on nodes with ssd drives.

Tweaking the Replication of System Ranges

Scenario:

• You have nodes spread across 7 datacenters.
• You want data replicated 5 times by default.
• For better performance, you want a copy of the meta ranges in all of the datacenters.
• To save disk space, you only want the internal timeseries data replicated 3 times by default.

Approach:

1. Start each node with a different locality attribute:

   $ cockroach start --insecure --host=<node1 hostname> --locality=datacenter=us-1
   $ cockroach start --insecure --host=<node2 hostname> --locality=datacenter=us-2 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node3 hostname> --locality=datacenter=us-3 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node4 hostname> --locality=datacenter=us-4 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node5 hostname> --locality=datacenter=us-5 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node6 hostname> --locality=datacenter=us-6 \
   --join=<node1 hostname>:26257
   $ cockroach start --insecure --host=<node7 hostname> --locality=datacenter=us-7 \
   --join=<node1 hostname>:26257

1. On any node, configure the default replication zone:

   echo 'num_replicas: 5' | cockroach zone set .default --insecure -f -

   range_min_bytes: 1048576
   range_max_bytes: 67108864
   gc:
     ttlseconds: 86400
   num_replicas: 5
   constraints: []

All data in the cluster will be replicated 5 times, including both SQL data and the internal system data.

1. On any node, configure the .meta replication zone:

   echo 'num_replicas: 7' | cockroach zone set .meta --insecure -f -

   range_min_bytes: 1048576
   range_max_bytes: 67108864
   gc:
     ttlseconds: 86400
   num_replicas: 7
   constraints: []

The .meta addressing ranges will be replicated such that one copy is in all 7 datacenters, while all other data will be replicated 5 times.

1. On any node, configure the .timeseries replication zone:

   echo 'num_replicas: 3' | cockroach zone set .timeseries --insecure -f -

   range_min_bytes: 1048576
   range_max_bytes: 67108864
   gc:
     ttlseconds: 86400
   num_replicas: 7
   constraints: []

The timeseries data will only be replicated 3 times without affecting the configuration of all other data.

See Also

Other Cockroach Commands

Was this helpful?