EXPERIMENTAL CHANGEFEED FOR

On this page Carat arrow pointing down
Warning:
As of October 30, 2020, CockroachDB v19.1 is no longer supported. For more details, refer to the Release Support Policy.
Note:

EXPERIMENTAL CHANGEFEED FOR is the core implementation of changefeeds. For the enterprise-only version, see CREATE CHANGEFEED.

New in v19.1: The EXPERIMENTAL CHANGEFEED FOR statement creates a new core changefeed, which streams row-level changes to the client indefinitely until the underlying connection is closed or the changefeed is canceled.

For more information, see Change Data Capture.

Warning:

This is an experimental feature. The interface and output are subject to change.

Required privileges

Changefeeds can only be created by superusers, i.e., members of the admin role. The admin role exists by default with root as the member.

Considerations

Because core changefeeds return results differently than other SQL statements, they require a dedicated database connection with specific settings around result buffering. In normal operation, CockroachDB improves performance by buffering results server-side before returning them to a client; however, result buffering is automatically turned off for core changefeeds. Core changefeeds also have different cancellation behavior than other queries: they can only be canceled by closing the underlying connection or issuing a CANCEL QUERY statement on a separate connection. Combined, these attributes of changefeeds mean that applications should explicitly create dedicated connections to consume changefeed data, instead of using a connection pool as most client drivers do by default.

This cancellation behavior also extends to client driver usage; in particular, when a client driver calls Rows.Close() after encountering errors for a stream of rows. The pgwire protocol requires that the rows be consumed before the connection is again usable, but in the case of a core changefeed, the rows are never consumed. It is therefore critical that you close the connection, otherwise the application will be blocked forever on Rows.Close().

Synopsis

> EXPERIMENTAL CHANGEFEED FOR table_name [ WITH (option [= value] [, ...]) ];

Parameters

Parameter Description
table_name The name of the table (or tables in a comma separated list) to create a changefeed for.
option / value For a list of available options and their values, see Options below.

Options

Option Value Description
updated N/A Include updated timestamps with each row.
resolved INTERVAL Periodically emit resolved timestamps to the changefeed. Optionally, set a minimum duration between emitting resolved timestamps. If unspecified, all resolved timestamps are emitted.

Example: resolved='10s'
envelope key_only / row Use key_only to emit only the key and no value, which is faster if you only want to know when the key changes.

Default: envelope=row
cursor Timestamp Emits any changes after the given timestamp, but does not output the current state of the table first. If cursor is not specified, the changefeed starts by doing a consistent scan of all the watched rows and emits the current value, then moves to emitting any changes that happen after the scan.

cursor can be used to start a new changefeed where a previous changefeed ended.

Example: CURSOR=1536242855577149065.0000000000
format json / experimental_avro Format of the emitted record. Currently, support for Avro is limited and experimental.

Default: format=json.
confluent_schema_registry Schema Registry address The Schema Registry address is required to use experimental_avro.

Avro limitations

Currently, support for Avro is limited and experimental. Below is a list of unsupported SQL types and values for Avro changefeeds:

Examples

Create a changefeed

In this example, you'll set up a core changefeed for a single-node cluster.

  1. In a terminal window, start cockroach:

    icon/buttons/copy
    $ cockroach start \
    --insecure \
    --listen-addr=localhost \
    --background
    
  2. As the root user, open the built-in SQL client:

    icon/buttons/copy
    $ cockroach sql \
    --url="postgresql://root@127.0.0.1:26257?sslmode=disable" \
    --format=csv
    
    Note:

    To determine how wide the columns need to be, the default table display format in cockroach sql buffers the results it receives from the server before printing them to the console. When consuming core changefeed data using cockroach sql, it's important to use a display format like csv that does not buffer its results. To set the display format, use the --format=csv flag when starting the built-in SQL client, or set the \set display_format=csv option once the SQL client is open.

  3. Enable the kv.rangefeed.enabled cluster setting:

    icon/buttons/copy
    > SET CLUSTER SETTING kv.rangefeed.enabled = true;
    
  4. Create table foo:

    icon/buttons/copy
    > CREATE TABLE foo (a INT PRIMARY KEY);
    
  5. Insert a row into the table:

    icon/buttons/copy
    > INSERT INTO foo VALUES (0);
    
  6. Start the core changefeed:

    icon/buttons/copy
    > EXPERIMENTAL CHANGEFEED FOR foo;
    
    table,key,value
    foo,[0],"{""after"": {""a"": 0}}"
    
  7. In a new terminal, add another row:

    icon/buttons/copy
    $ cockroach sql --insecure -e "INSERT INTO foo VALUES (1)"
    
  8. Back in the terminal where the core changefeed is streaming, the following output has appeared:

    foo,[1],"{""after"": {""a"": 1}}"
    

    Note that records may take a couple of seconds to display in the core changefeed.

  9. To stop streaming the changefeed, enter CTRL+C into the terminal where the changefeed is running.

  10. To stop cockroach, run:

    icon/buttons/copy
    $ cockroach quit --insecure
    

Create a changefeed with Avro

In this example, you'll set up a core changefeed for a single-node cluster that emits Avro records. CockroachDB's Avro binary encoding convention uses the Confluent Schema Registry to store Avro schemas.

  1. In a terminal window, start cockroach:

    icon/buttons/copy
    $ cockroach start --insecure --listen-addr=localhost --background
    
  2. Download and extract the Confluent Open Source platform.

  3. Move into the extracted confluent-<version> directory and start Confluent:

    icon/buttons/copy
    $ ./bin/confluent start
    

    Only zookeeper, kafka, and schema-registry are needed. To troubleshoot Confluent, see their docs.

  4. As the root user, open the built-in SQL client:

    icon/buttons/copy
    $ cockroach sql --url="postgresql://root@127.0.0.1:26257?sslmode=disable" --format=csv
    
    Note:

    To determine how wide the columns need to be, the default table display format in cockroach sql buffers the results it receives from the server before printing them to the console. When consuming core changefeed data using cockroach sql, it's important to use a display format like csv that does not buffer its results. To set the display format, use the --format=csv flag when starting the built-in SQL client, or set the \set display_format=csv option once the SQL client is open.

  5. Enable the kv.rangefeed.enabled cluster setting:

    icon/buttons/copy
    > SET CLUSTER SETTING kv.rangefeed.enabled = true;
    
  6. Create table bar:

    icon/buttons/copy
    > CREATE TABLE bar (a INT PRIMARY KEY);
    
  7. Insert a row into the table:

    icon/buttons/copy
    > INSERT INTO bar VALUES (0);
    
  8. Start the core changefeed:

    icon/buttons/copy
    > EXPERIMENTAL CHANGEFEED FOR bar WITH format = experimental_avro, confluent_schema_registry = 'http://localhost:8081';
    
    table,key,value
    bar,\000\000\000\000\001\002\000,\000\000\000\000\002\002\002\000
    
  9. In a new terminal, add another row:

    icon/buttons/copy
    $ cockroach sql --insecure -e "INSERT INTO bar VALUES (1)"
    
  10. Back in the terminal where the core changefeed is streaming, the output will appear:

    bar,\000\000\000\000\001\002\002,\000\000\000\000\002\002\002\002
    

    Note that records may take a couple of seconds to display in the core changefeed.

  11. To stop streaming the changefeed, enter CTRL+C into the terminal where the changefeed is running.

  12. To stop cockroach, run:

    icon/buttons/copy
    $ cockroach quit --insecure
    
  13. To stop Confluent, move into the extracted confluent-<version> directory and stop Confluent:

    icon/buttons/copy
    $ ./bin/confluent stop
    

    To terminate all Confluent processes, use:

    icon/buttons/copy
    $ ./bin/confluent destroy
    

See also


Yes No
On this page

Yes No