This page describes newly identified limitations in the CockroachDB v21.1.21 release as well as unresolved limitations identified in earlier releases.
New limitations
CockroachDB does not properly optimize some left and anti joins with GIN indexes
Left joins and anti joins involving JSONB
, ARRAY
, or spatial-typed columns with a multi-column or partitioned GIN index will not take advantage of the index if the prefix columns of the index are unconstrained, or if they are constrained to multiple, constant values.
To work around this limitation, make sure that the prefix columns of the index are either constrained to single constant values, or are part of an equality condition with an input column (e.g., col1 = col2
, where col1
is a prefix column and col2
is an input column).
For example, suppose you have the following multi-region database and tables:
CREATE DATABASE multi_region_test_db PRIMARY REGION "europe-west1" REGIONS "us-west1", "us-east1" SURVIVE REGION FAILURE;
USE multi_region_test_db;
CREATE TABLE t1 (
k INT PRIMARY KEY,
geom GEOMETRY
);
CREATE TABLE t2 (
k INT PRIMARY KEY,
geom GEOMETRY,
INVERTED INDEX geom_idx (geom)
) LOCALITY REGIONAL BY ROW;
And you insert some data into the tables:
INSERT INTO t1 SELECT generate_series(1, 1000), 'POINT(1.0 1.0)';
INSERT INTO t2 (crdb_region, k, geom) SELECT 'us-east1', generate_series(1, 1000), 'POINT(1.0 1.0)';
INSERT INTO t2 (crdb_region, k, geom) SELECT 'us-west1', generate_series(1001, 2000), 'POINT(2.0 2.0)';
INSERT INTO t2 (crdb_region, k, geom) SELECT 'europe-west1', generate_series(2001, 3000), 'POINT(3.0 3.0)';
If you attempt a left join between t1
and t2
on only the geometry columns, CockroachDB will not be able to plan an inverted join:
> EXPLAIN SELECT * FROM t1 LEFT JOIN t2 ON st_contains(t1.geom, t2.geom);
info
------------------------------------
distribution: full
vectorized: true
• cross join (right outer)
│ pred: st_contains(geom, geom)
│
├── • scan
│ estimated row count: 3,000
│ table: t2@primary
│ spans: FULL SCAN
│
└── • scan
estimated row count: 1,000
table: t1@primary
spans: FULL SCAN
(15 rows)
However, if you constrain the crdb_region
column to a single value, CockroachDB can plan an inverted join:
> EXPLAIN SELECT * FROM t1 LEFT JOIN t2 ON st_contains(t1.geom, t2.geom) AND t2.crdb_region = 'us-east1';
info
--------------------------------------------------
distribution: full
vectorized: true
• lookup join (left outer)
│ table: t2@primary
│ equality: (crdb_region, k) = (crdb_region,k)
│ equality cols are key
│ pred: st_contains(geom, geom)
│
└── • inverted join (left outer)
│ table: t2@geom_idx
│
└── • render
│
└── • scan
estimated row count: 1,000
table: t1@primary
spans: FULL SCAN
(18 rows)
If you do not know which region to use, you can combine queries with UNION ALL
:
> EXPLAIN SELECT * FROM t1 LEFT JOIN t2 ON st_contains(t1.geom, t2.geom) AND t2.crdb_region = 'us-east1'
UNION ALL SELECT * FROM t1 LEFT JOIN t2 ON st_contains(t1.geom, t2.geom) AND t2.crdb_region = 'us-west1'
UNION ALL SELECT * FROM t1 LEFT JOIN t2 ON st_contains(t1.geom, t2.geom) AND t2.crdb_region = 'europe-west1';
info
----------------------------------------------------------
distribution: full
vectorized: true
• union all
│
├── • union all
│ │
│ ├── • lookup join (left outer)
│ │ │ table: t2@primary
│ │ │ equality: (crdb_region, k) = (crdb_region,k)
│ │ │ equality cols are key
│ │ │ pred: st_contains(geom, geom)
│ │ │
│ │ └── • inverted join (left outer)
│ │ │ table: t2@geom_idx
│ │ │
│ │ └── • render
│ │ │
│ │ └── • scan
│ │ estimated row count: 1,000
│ │ table: t1@primary
│ │ spans: FULL SCAN
│ │
│ └── • lookup join (left outer)
│ │ table: t2@primary
│ │ equality: (crdb_region, k) = (crdb_region,k)
│ │ equality cols are key
│ │ pred: st_contains(geom, geom)
│ │
│ └── • inverted join (left outer)
│ │ table: t2@geom_idx
│ │
│ └── • render
│ │
│ └── • scan
│ estimated row count: 1,000
│ table: t1@primary
│ spans: FULL SCAN
│
└── • lookup join (left outer)
│ table: t2@primary
│ equality: (crdb_region, k) = (crdb_region,k)
│ equality cols are key
│ pred: st_contains(geom, geom)
│
└── • inverted join (left outer)
│ table: t2@geom_idx
│
└── • render
│
└── • scan
estimated row count: 1,000
table: t1@primary
spans: FULL SCAN
(54 rows)
SET
does not ROLLBACK
in a transaction
SET
does not properly apply ROLLBACK
within a transaction. For example, in the following transaction, showing the TIME ZONE
variable does not return 2
as expected after the rollback:
SET TIME ZONE +2;
BEGIN;
SET TIME ZONE +3;
ROLLBACK;
SHOW TIME ZONE;
timezone
------------
3
Unresolved limitations
Optimizer stale statistics deletion when columns are dropped
When a column is dropped from a multi-column index, the optimizer will not collect new statistics for the deleted column. However, the optimizer never deletes the old multi-column statistics. This can cause a buildup of statistics in
system.table_statistics
leading the optimizer to use stale statistics, which could result in sub-optimal plans. To workaround this issue and avoid these scenarios, explicitly delete those statistics from thesystem.table_statistics
table.Single-column statistics are not deleted when columns are dropped, which could cause minor performance issues.
Automatic statistics refresher may not refresh after upgrade
The automatic statistics refresher automatically checks whether it needs to refresh statistics for every table in the database upon startup of each node in the cluster. If statistics for a table have not been refreshed in a while, this will trigger collection of statistics for that table. If statistics have been refreshed recently, it will not force a refresh. As a result, the automatic statistics refresher does not necessarily perform a refresh of statistics after an upgrade. This could cause a problem, for example, if the upgrade moves from a version without histograms to a version with histograms. To refresh statistics manually, use CREATE STATISTICS
.
IMPORT
into a REGIONAL BY ROW
table
CockroachDB does not currently support IMPORT
s into REGIONAL BY ROW
tables that are part of multi-region databases.
To work around this limitation, you will need to take the following steps:
In the source database, export the
crdb_region
column separately when exporting your data.EXPORT INTO CSV 'nodelocal://0/src_rbr' FROM SELECT crdb_region, i from src_rbr;
For more information about the syntax, see
EXPORT
.In the destination database, create a table that has a
crdb_region
column of the right type as shown below.CREATE TABLE dest_rbr (crdb_region public.crdb_internal_region NOT NULL, i INT);
Import the data (including the
crdb_region
column explicitly) usingIMPORT INTO
:IMPORT INTO dest_rbr (crdb_region, i) CSV DATA ('nodelocal://0/src_rbr/export*.csv')
Convert the destination table to
REGIONAL BY ROW
usingALTER TABLE ... ALTER COLUMN
andALTER TABLE ... SET LOCALITY
:ALTER TABLE dest_rbr ALTER COLUMN crdb_region SET DEFAULT default_to_database_primary_region(gateway_region())::public.crdb_internal_region;
ALTER TABLE dest_rbr SET LOCALITY REGIONAL BY ROW AS crdb_region;
BACKUP
of multi-region tables
CockroachDB does not currently support BACKUP
s of individual tables that are part of multi-region databases. For example, you cannot backup a GLOBAL
or REGIONAL
table individually.
To work around this limitation, you must back up the database or the entire cluster.
Differences in syntax and behavior between CockroachDB and PostgreSQL
CockroachDB supports the PostgreSQL wire protocol and the majority of its syntax. However, CockroachDB does not support some of the PostgreSQL features or behaves differently from PostgreSQL because not all features can be easily implemented in a distributed system.
For a list of known differences in syntax and behavior between CockroachDB and PostgreSQL, see Features that differ from PostgreSQL.
Multiple arbiter indexes for INSERT ON CONFLICT DO UPDATE
CockroachDB does not currently support multiple arbiter indexes for INSERT ON CONFLICT DO UPDATE
, and will return an error if there are multiple unique or exclusion constraints matching the ON CONFLICT DO UPDATE
specification.
IMPORT
into a table with partial indexes
CockroachDB does not currently support IMPORT
s into tables with partial indexes.
To work around this limitation:
- Drop any partial indexes defined on the table.
- Perform the
IMPORT
. - Recreate the partial indexes.
If you are performing an IMPORT
of a PGDUMP
with partial indexes:
- Drop the partial indexes on the PostgreSQL server.
- Recreate the
PGDUMP
. IMPORT
thePGDUMP
.- Add partial indexes on the CockroachDB server.
Spatial support limitations
CockroachDB supports efficiently storing and querying spatial data, with the following limitations:
Not all PostGIS spatial functions are supported.
The
AddGeometryColumn
spatial function only allows constant arguments.The
AddGeometryColumn
spatial function only allows thetrue
value for itsuse_typmod
parameter.CockroachDB does not support the
@
operator. Instead of using@
in spatial expressions, we recommend using the inverse, with~
. For example, instead ofa @ b
, useb ~ a
.CockroachDB does not yet support
INSERT
s into thespatial_ref_sys
table. This limitation also blocks theogr2ogr -f PostgreSQL
file conversion command.CockroachDB does not yet support
DECLARE CURSOR
, which prevents theogr2ogr
conversion tool from exporting from CockroachDB to certain formats and prevents QGIS from working with CockroachDB. To work around this limitation, export data first to CSV or GeoJSON format.CockroachDB does not yet support Triangle or
TIN
spatial shapes.CockroachDB does not yet support Curve, MultiCurve, or CircularString spatial shapes.
CockroachDB does not yet support k-nearest neighbors.
CockroachDB does not support using schema name prefixes to refer to data types with type modifiers (e.g.,
public.geometry(linestring, 4326)
). Instead, use fully-unqualified names to refer to data types with type modifiers (e.g.,geometry(linestring,4326)
).Note that, in
IMPORT PGDUMP
output,GEOMETRY
andGEOGRAPHY
data type names are prefixed bypublic.
. If the type has a type modifier, you must remove thepublic.
from the type name in order for the statements to work in CockroachDB.
Subqueries in SET
statements
It is not currently possible to use a subquery in a SET
or SET CLUSTER SETTING
statement. For example:
> SET application_name = (SELECT 'a' || 'b');
ERROR: invalid value for parameter "application_name": "(SELECT 'a' || 'b')"
SQLSTATE: 22023
DETAIL: subqueries are not allowed in SET
Enterprise BACKUP
does not capture database/table/column comments
The COMMENT ON
statement associates comments to databases, tables, or columns. However, the internal table (system.comments
) in which these comments are stored is not captured by a BACKUP
of a table or database.
As a workaround, take a cluster backup instead, as the system.comments
table is included in cluster backups.
Change data capture
Change data capture (CDC) provides efficient, distributed, row-level change feeds into Apache Kafka for downstream processing such as reporting, caching, or full-text indexing. It has the following known limitations:
- Changefeeds only work on tables with a single column family (which is the default for new tables). Tracking GitHub Issue
- Changefeeds cannot be backed up or restored. Tracking GitHub Issue
- Changefeeds cannot be altered. To alter, cancel the changefeed and create a new one with updated settings from where it left off. Tracking GitHub Issue
- Changefeed target options are limited to tables. Tracking GitHub Issue
- Using a cloud storage sink only works with
JSON
and emits newline-delimited json files. Tracking GitHub Issue - Enterprise changefeeds are currently disabled for CockroachDB Serverless clusters. Core changefeeds are enabled. Tracking GitHub Issue
- Changefeeds will emit
NULL
values forVIRTUAL
computed columns and not the column's computed value. Tracking GitHub Issue
DB Console may become inaccessible for secure clusters
Accessing the DB Console for a secure cluster now requires login information (i.e., username and password). This login information is stored in a system table that is replicated like other data in the cluster. If a majority of the nodes with the replicas of the system table data go down, users will be locked out of the DB Console.
AS OF SYSTEM TIME
in SELECT
statements
AS OF SYSTEM TIME
can only be used in a top-level SELECT
statement. That is, we do not support statements like INSERT INTO t SELECT * FROM t2 AS OF SYSTEM TIME <time>
or two subselects in the same statement with differing AS OF SYSTEM TIME
arguments.
Large index keys can impair performance
The use of tables with very large primary or secondary index keys (>32KB) can result in excessive memory usage. Specifically, if the primary or secondary index key is larger than 32KB the default indexing scheme for storage engine SSTables breaks down and causes the index to be excessively large. The index is pinned in memory by default for performance.
To work around this issue, we recommend limiting the size of primary and secondary keys to 4KB, which you must account for manually. Note that most columns are 8B (exceptions being STRING
and JSON
), which still allows for very complex key structures.
Using LIKE...ESCAPE
in WHERE
and HAVING
constraints
CockroachDB tries to optimize most comparisons operators in WHERE
and HAVING
clauses into constraints on SQL indexes by only accessing selected rows. This is done for LIKE
clauses when a common prefix for all selected rows can be determined in the search pattern (e.g., ... LIKE 'Joe%'
). However, this optimization is not yet available if the ESCAPE
keyword is also used.
TRUNCATE
does not behave like DELETE
TRUNCATE
is not a DML statement, but instead works as a DDL statement. Its limitations are the same as other DDL statements, which are outlined in Online Schema Changes: Limitations
Ordering tables by JSONB
/JSON
-typed columns
CockroachDB does not currently key-encode JSON values. As a result, tables cannot be ordered by JSONB
/JSON
-typed columns.
Current sequence value not checked when updating min/max value
Altering the minimum or maximum value of a series does not check the current value of a series. This means that it is possible to silently set the maximum to a value less than, or a minimum value greater than, the current value.
Using default_int_size
session variable in batch of statements
When setting the default_int_size
session variable in a batch of statements such as SET default_int_size='int4'; SELECT 1::IN
, the default_int_size
variable will not take affect until the next statement. This happens because statement parsing takes place asynchronously from statement execution.
As a workaround, set default_int_size
via your database driver, or ensure that SET default_int_size
is in its own statement.
COPY FROM
statements are not supported in the CockroachDB SQL shell
The built-in SQL shell provided with CockroachDB (cockroach sql
/ cockroach demo
) does not currently support importing data with the COPY
statement.
To load data into CockroachDB, we recommend that you use an IMPORT
. If you must use a COPY
statement, you can issue the statement from the psql
client command provided with PostgreSQL, or from another third-party client.
COPY
syntax not supported by CockroachDB
CockroachDB does not yet support the following COPY
syntax:
COPY ... TO
. To copy data from a CockroachDB cluster to a file, use anEXPORT
statement.COPY ... FROM ... WHERE <expr>
Import with a high amount of disk contention
IMPORT
can sometimes fail with a "context canceled" error, or can restart itself many times without ever finishing. If this is happening, it is likely due to a high amount of disk contention. This can be mitigated by setting the kv.bulk_io_write.max_rate
cluster setting to a value below your max disk write speed. For example, to set it to 10MB/s, execute:
> SET CLUSTER SETTING kv.bulk_io_write.max_rate = '10MB';
Placeholders in PARTITION BY
When defining a table partition, either during table creation or table alteration, it is not possible to use placeholders in the PARTITION BY
clause.
Dropping a single partition
CockroachDB does not currently support dropping a single partition from a table. In order to remove partitions, you can repartition the table.
Adding a column with sequence-based DEFAULT
values
It is currently not possible to add a column to a table when the column uses a sequence as the DEFAULT
value, for example:
> CREATE TABLE t (x INT);
> INSERT INTO t(x) VALUES (1), (2), (3);
> CREATE SEQUENCE s;
> ALTER TABLE t ADD COLUMN y INT DEFAULT nextval('s');
ERROR: nextval(): unimplemented: cannot evaluate scalar expressions containing sequence operations in this context
SQLSTATE: 0A000
Available capacity metric in the DB Console
If you are testing your deployment locally with multiple CockroachDB nodes running on a single machine (this is not recommended in production), you must explicitly set the store size per node in order to display the correct capacity. Otherwise, the machine's actual disk capacity will be counted as a separate store for each node, thus inflating the computed capacity.
Schema changes within transactions
Within a single transaction:
- DDL statements cannot be mixed with DML statements. As a workaround, you can split the statements into separate transactions. For more details, see examples of unsupported statements.
- As of version v2.1, you can run schema changes inside the same transaction as a
CREATE TABLE
statement. For more information, see this example. - A
CREATE TABLE
statement containingFOREIGN KEY
orINTERLEAVE
clauses cannot be followed by statements that reference the new table. - Database, schema, table, and user-defined type names cannot be reused. For example, you cannot drop a table named
a
and then create (or rename) a different table with the namea
. Similarly, you cannot rename a database nameda
tob
and then create (or rename) a different database with the namea
. As a workaround, splitRENAME TO
,DROP
, andCREATE
statements that reuse object names into separate transactions. - Schema change DDL statements inside a multi-statement transaction can fail while other statements succeed.
- As of v19.1, some schema changes can be used in combination in a single
ALTER TABLE
statement. For a list of commands that can be combined, seeALTER TABLE
. For a demonstration, see Add and rename columns atomically. DROP COLUMN
can result in data loss if one of the other schema changes in the transaction fails or is canceled. To work around this, move theDROP COLUMN
statement to its own explicit transaction or run it in a single statement outside the existing transaction.
If a schema change within a transaction fails, manual intervention may be needed to determine which has failed. After determining which schema change(s) failed, you can then retry the schema changes.
Schema change DDL statements inside a multi-statement transaction can fail while other statements succeed
Schema change DDL statements that run inside a multi-statement transaction with non-DDL statements can fail at COMMIT
time, even if other statements in the transaction succeed. This leaves such transactions in a "partially committed, partially aborted" state that may require manual intervention to determine whether the DDL statements succeeded.
If such a failure occurs, CockroachDB will emit a new CockroachDB-specific error code, XXA00
, and the following error message:
transaction committed but schema change aborted with error: <description of error>
HINT: Some of the non-DDL statements may have committed successfully, but some of the DDL statement(s) failed.
Manual inspection may be required to determine the actual state of the database.
This limitation exists in versions of CockroachDB prior to 19.2. In these older versions, CockroachDB returned the Postgres error code 40003
, "statement completion unknown"
.
If you must execute schema change DDL statements inside a multi-statement transaction, we strongly recommend checking for this error code and handling it appropriately every time you execute such transactions.
This error will occur in various scenarios, including but not limited to:
- Creating a unique index fails because values aren't unique.
- The evaluation of a computed value fails.
- Adding a constraint (or a column with a constraint) fails because the constraint is violated for the default/computed values in the column.
To see an example of this error, start by creating the following table.
CREATE TABLE T(x INT);
INSERT INTO T(x) VALUES (1), (2), (3);
Then, enter the following multi-statement transaction, which will trigger the error.
BEGIN;
ALTER TABLE t ADD CONSTRAINT unique_x UNIQUE(x);
INSERT INTO T(x) VALUES (3);
COMMIT;
pq: transaction committed but schema change aborted with error: (23505): duplicate key value (x)=(3) violates unique constraint "unique_x"
HINT: Some of the non-DDL statements may have committed successfully, but some of the DDL statement(s) failed.
Manual inspection may be required to determine the actual state of the database.
In this example, the INSERT
statement committed, but the ALTER TABLE
statement adding a UNIQUE
constraint failed. We can verify this by looking at the data in table t
and seeing that the additional non-unique value 3
was successfully inserted.
SELECT * FROM t;
x
+---+
1
2
3
3
(4 rows)
Schema changes between executions of prepared statements
When the schema of a table targeted by a prepared statement changes after the prepared statement is created, future executions of the prepared statement could result in an error. For example, adding a column to a table referenced in a prepared statement with a SELECT *
clause will result in an error:
CREATE TABLE users (id INT PRIMARY KEY);
PREPARE prep1 AS SELECT * FROM users;
ALTER TABLE users ADD COLUMN name STRING;
INSERT INTO users VALUES (1, 'Max Roach');
EXECUTE prep1;
ERROR: cached plan must not change result type
SQLSTATE: 0A000
It's therefore recommended to explicitly list result columns instead of using SELECT *
in prepared statements, when possible.
Size limits on statement input from SQL clients
CockroachDB imposes a hard limit of 16MiB on the data input for a single statement passed to CockroachDB from a client (including the SQL shell). We do not recommend attempting to execute statements from clients with large input.
Using \|
to perform a large input in the SQL shell
In the built-in SQL shell, using the \|
operator to perform a large number of inputs from a file can cause the server to close the connection. This is because \|
sends the entire file as a single query to the server, which can exceed the upper bound on the size of a packet the server can accept from any client (16MB).
As a workaround, execute the file from the command line with cat data.sql | cockroach sql
instead of from within the interactive shell.
New values generated by DEFAULT
expressions during ALTER TABLE ADD COLUMN
When executing an ALTER TABLE ADD COLUMN
statement with a DEFAULT
expression, new values generated:
- use the default search path regardless of the search path configured in the current session via
SET SEARCH_PATH
. - use the UTC time zone regardless of the time zone configured in the current session via
SET TIME ZONE
. - have no default database regardless of the default database configured in the current session via
SET DATABASE
, so you must specify the database of any tables they reference. - use the transaction timestamp for the
statement_timestamp()
function regardless of the time at which theALTER
statement was issued.
Load-based lease rebalancing in uneven latency deployments
When nodes are started with the --locality
flag, CockroachDB attempts to place the replica lease holder (the replica that client requests are forwarded to) on the node closest to the source of the request. This means as client requests move geographically, so too does the replica lease holder.
However, you might see increased latency caused by a consistently high rate of lease transfers between datacenters in the following case:
- Your cluster runs in datacenters which are very different distances away from each other.
- Each node was started with a single tier of
--locality
, e.g.,--locality=datacenter=a
. - Most client requests get sent to a single datacenter because that's where all your application traffic is.
To detect if this is happening, open the DB Console, select the Queues dashboard, hover over the Replication Queue graph, and check the Leases Transferred / second data point. If the value is consistently larger than 0, you should consider stopping and restarting each node with additional tiers of locality to improve request latency.
For example, let's say that latency is 10ms from nodes in datacenter A to nodes in datacenter B but is 100ms from nodes in datacenter A to nodes in datacenter C. To ensure A's and B's relative proximity is factored into lease holder rebalancing, you could restart the nodes in datacenter A and B with a common region, --locality=region=foo,datacenter=a
and --locality=region=foo,datacenter=b
, while restarting nodes in datacenter C with a different region, --locality=region=bar,datacenter=c
.
Overload resolution for collated strings
Many string operations are not properly overloaded for collated strings, for example:
> SELECT 'string1' || 'string2';
?column?
------------------
string1string2
(1 row)
> SELECT ('string1' collate en) || ('string2' collate en);
pq: unsupported binary operator: <collatedstring{en}> || <collatedstring{en}>
Max size of a single column family
When creating or updating a row, if the combined size of all values in a single column family exceeds the max range size (512 MiB by default) for the table, the operation may fail, or cluster performance may suffer.
As a workaround, you can either manually split a table's columns into multiple column families, or you can create a table-specific zone configuration with an increased max range size.
Simultaneous client connections and running queries on a single node
When a node has both a high number of client connections and running queries, the node may crash due to memory exhaustion. This is due to CockroachDB not accurately limiting the number of clients and queries based on the amount of available RAM on the node.
To prevent memory exhaustion, monitor each node's memory usage and ensure there is some margin between maximum CockroachDB memory usage and available system RAM. For more details about memory usage in CockroachDB, see this blog post.
Privileges for DELETE
and UPDATE
Every DELETE
or UPDATE
statement constructs a SELECT
statement, even when no WHERE
clause is involved. As a result, the user executing DELETE
or UPDATE
requires both the DELETE
and SELECT
or UPDATE
and SELECT
privileges on the table.
Correlated common table expressions
CockroachDB does not support correlated common table expressions. This means that a CTE cannot refer to a variable defined outside the scope of that CTE.
For example, the following query returns an error:
> SELECT * FROM users
WHERE id =
(WITH rides_home AS
(SELECT revenue FROM rides
WHERE end_address = address)
SELECT rider_id FROM rides_home);
ERROR: CTEs may not be correlated
SQLSTATE: 0A000
This query returns an error because the WITH rides_home
clause references a column (address
) returned by the SELECT
statement at the top level of the query, outside the rides_home
CTE definition.
ROLLBACK TO SAVEPOINT
in high-priority transactions containing DDL
Transactions with priority HIGH
that contain DDL and ROLLBACK TO SAVEPOINT
are not supported, as they could result in a deadlock. For example:
> BEGIN PRIORITY HIGH; SAVEPOINT s; CREATE TABLE t(x INT); ROLLBACK TO SAVEPOINT s;
ERROR: unimplemented: cannot use ROLLBACK TO SAVEPOINT in a HIGH PRIORITY transaction containing DDL
SQLSTATE: 0A000
HINT: You have attempted to use a feature that is not yet implemented.
See: https://github.com/cockroachdb/cockroach/issues/46414
Concurrent SQL shells overwrite each other's history
The built-in SQL shell stores its command history in a single file by default (.cockroachsql_history
). When running multiple instances of the SQL shell on the same machine. Therefore, each shell's command history can get overwritten in unexpected ways.
As a workaround, set the COCKROACH_SQL_CLI_HISTORY
environment variable to different values for the two different shells, for example:
$ export COCKROACH_SQL_CLI_HISTORY=.cockroachsql_history_shell_1
$ export COCKROACH_SQL_CLI_HISTORY=.cockroachsql_history_shell_2
Passwords with special characters cannot be passed in connection parameter
CockroachDB does not allow passwords with special characters to be passed as a connection parameter to cockroach
commands.
CockroachDB does not test for all connection failure scenarios
CockroachDB servers rely on the network to report when a TCP connection fails. In most scenarios when a connection fails, the network immediately reports a connection failure, resulting in a Connection refused
error.
However, if there is no host at the target IP address, or if a firewall rule blocks traffic to the target address and port, a TCP handshake can linger while the client network stack waits for a TCP packet in response to network requests. To work around this kind of scenario, we recommend the following:
- When migrating a node to a new machine, keep the server listening at the previous IP address until the cluster has completed the migration.
- Configure any active network firewalls to allow node-to-node traffic.
- Verify that orchestration tools (e.g., Kubernetes) are configured to use the correct network connection information.
Some column-dropping schema changes do not roll back properly
Some schema changes that drop columns cannot be rolled back properly.
In some cases, the rollback will succeed, but the column data might be partially or totally missing, or stale due to the asynchronous nature of the schema change.
In other cases, the rollback will fail in such a way that will never be cleaned up properly, leaving the table descriptor in a state where no other schema changes can be run successfully.
To reduce the chance that a column drop will roll back incorrectly:
Perform column drops in transactions separate from other schema changes. This ensures that other schema change failures will not cause the column drop to be rolled back.
Drop all constraints (including unique indexes) on the column in a separate transaction, before dropping the column.
Drop any default values or computed expressions on a column before attempting to drop the column. This prevents conflicts between constraints and default/computed values during a column drop rollback.
If you think a rollback of a column-dropping schema change has occurred, check the jobs table. Schema changes with an error prefaced by cannot be reverted, manual cleanup may be required
might require manual intervention.
Disk-spilling on joins with JSON
columns
If the execution of a join query exceeds the limit set for memory-buffering operations (i.e., the value set for the sql.distsql.temp_storage.workmem
cluster setting), CockroachDB will spill the intermediate results of computation to disk. If the join operation spills to disk, and at least one of the equality columns is of type JSON
, CockroachDB returns the error unable to encode table key: *tree.DJSON
. If the memory limit is not reached, then the query will be processed without error.
Disk-spilling not supported for some unordered distinct operations
Disk spilling isn't supported when running UPSERT
statements that have nulls are distinct
and error on duplicate
markers. You can check this by using EXPLAIN
and looking at the statement plan.
├── distinct | |
│ │ | distinct on | ...
│ │ | nulls are distinct |
│ │ | error on duplicate |
Using interleaved tables in backups
Interleaved tables are now disabled by default in v21.1. Your backup will fail if your cluster includes interleaved data. To include interleaved tables, use the INCLUDE_DEPRECATED_INTERLEAVES
option. Note that, interleaved tables will be permanently removed from CockroachDB in a future release, so you will be unable to RESTORE
backups containing interleaved tables to any future versions.
GIN index scans can't be generated for some statement filters
CockroachDB cannot generate GIN index scans for statements with filters that have both JSON fetch values and containment operators. For example the following statement won't be index-accelerated:
SELECT * FROM mytable WHERE j->'a' @> '{"b": "c"}';
CockroachDB v20.1 and earlier would generate index scans for these filters, though it is not recommended as the normalization rules used to convert the filters into JSON containment expressions would sometimes produce inequivalent expressions.
The workaround is to rewrite the statement filters to avoid using both JSON fetch values and containment operators. The following statement is index-accelerated and equivalent to the non-accelerated statement above:
SELECT * FROM mytable WHERE j @> '{"a": {"b": "c"}}'
The optimizer won't plan locality optimized searches using unique indexes on virtual computed columns
CockroachDB will not plan locality optimized searches using unique indexes on virtual computed columns.
A workaround is to use stored computed columns.
Unique indexes on virtual computed columns can't be used with multi-region clusters
CockroachDB performs a full-table scan on all inserts when using partitioned unique indexes on virtual computed columns.
A workaround is to use stored computed columns.
Remove a UNIQUE
index created as part of CREATE TABLE
UNIQUE
indexes created as part of a CREATE TABLE
statement cannot be removed without using CASCADE
. Unique indexes created with CREATE INDEX
do not have this limitation.