Once you've installed CockroachDB, it's simple to run an insecure multi-node cluster locally.
To deploy a free CockroachDB Cloud cluster instead of running CockroachDB yourself, see the Quickstart.
Before you begin
- Make sure you have already installed CockroachDB.
- For quick SQL testing or app development, consider running a single-node cluster instead.
- Note that running multiple nodes on a single host is useful for testing CockroachDB, but it's not suitable for production. To run a physically distributed cluster, see Manual Deployment or Orchestrated Deployment, and review the Production Checklist.
Step 1. Start the cluster
Use the
cockroach start
command to start the first node:$ cockroach start \ --insecure \ --store=node1 \ --listen-addr=localhost:26257 \ --http-addr=localhost:8080 \ --join=localhost:26257,localhost:26258,localhost:26259 \ --background
You'll see a message like the following:
* * WARNING: RUNNING IN INSECURE MODE! * * - Your cluster is open for any client that can access localhost. * - Any user, even root, can log in without providing a password. * - Any user, connecting as root, can read or write any data in your cluster. * - There is no network encryption nor authentication, and thus no confidentiality. * * Check out how to secure your cluster: https://www.cockroachlabs.com/docs/v19.2/secure-a-cluster.html * * * INFO: initial startup completed. * Node will now attempt to join a running cluster, or wait for `cockroach init`. * Client connections will be accepted after this completes successfully. * Check the log file(s) for progress. *
Take a moment to understand the flags you used:
- The
--insecure
flag makes communication unencrypted. - Since this is a purely local cluster,
--listen-addr=localhost:26257
and--http-addr=localhost:8080
tell the node to listen only onlocalhost
, with port26257
used for internal and client traffic and port8080
used for HTTP requests from the DB Console. - The
--store
flag indicates the location where the node's data and logs are stored. The
--join
flag specifies the addresses and ports of the nodes that will initially comprise your cluster. You'll use this exact--join
flag when starting other nodes as well.For a cluster in a single region, set 3-5
--join
addresses. Each starting node will attempt to contact one of the join hosts. In case a join host cannot be reached, the node will try another address on the list until it can join the gossip network.The
--background
flag starts thecockroach
process in the background so you can continue using the same terminal for other operations.
- The
Start two more nodes:
$ cockroach start \ --insecure \ --store=node2 \ --listen-addr=localhost:26258 \ --http-addr=localhost:8081 \ --join=localhost:26257,localhost:26258,localhost:26259 \ --background
$ cockroach start \ --insecure \ --store=node3 \ --listen-addr=localhost:26259 \ --http-addr=localhost:8082 \ --join=localhost:26257,localhost:26258,localhost:26259 \ --background
These commands are the same as before but with unique
--store
,--listen-addr
, and--http-addr
flags.Use the
cockroach init
command to perform a one-time initialization of the cluster, sending the request to any node on the--join
list:$ cockroach init --insecure --host=localhost:26257
You'll see the following message:
Cluster successfully initialized
At this point, each node also prints helpful startup details to its log. For example, the following command retrieves node 1's startup details:
$ grep 'node starting' node1/logs/cockroach.log -A 11
The output will look something like this:
CockroachDB node starting at build: CCL v22.1.22 @ 2023-08-14 00:00:00 (go1.12.6) webui: http://localhost:8080 sql: postgresql://root@localhost:26257?sslmode=disable RPC client flags: cockroach <client cmd> --host=localhost:26257 --insecure logs: /Users/<username>/node1/logs temp dir: /Users/<username>/node1/cockroach-temp242232154 external I/O path: /Users/<username>/node1/extern store[0]: path=/Users/<username>/node1 status: initialized new cluster clusterID: 8a681a16-9623-4fc1-a537-77e9255daafd nodeID: 1
Step 2. Use the built-in SQL client
Now that your cluster is live, you can use any node as a SQL gateway. To test this out, let's use CockroachDB's built-in SQL client.
Run the cockroach sql command against node 1:
$ cockroach sql --insecure --host=localhost:26257
Run some basic CockroachDB SQL statements:
> CREATE DATABASE bank;
> CREATE TABLE bank.accounts (id INT PRIMARY KEY, balance DECIMAL);
> INSERT INTO bank.accounts VALUES (1, 1000.50);
> SELECT * FROM bank.accounts;
id | balance +----+---------+ 1 | 1000.50 (1 row)
Now exit the SQL shell on node 1 and open a new shell on node 2:
> \q
$ cockroach sql --insecure --host=localhost:26258
Note:In a real deployment, all nodes would likely use the default port
26257
, and so you wouldn't need to set the port portion of--host
.Run the same
SELECT
query as before:> SELECT * FROM bank.accounts;
id | balance +----+---------+ 1 | 1000.50 (1 row)
As you can see, node 1 and node 2 behaved identically as SQL gateways.
Exit the SQL shell on node 2:
> \q
Step 3. Run a sample workload
CockroachDB also comes with a number of built-in workloads for simulating client traffic. Let's run the workload based on CockroachDB's sample vehicle-sharing application, MovR.
Load the initial dataset:
$ cockroach workload init movr \ 'postgresql://root@localhost:26257?sslmode=disable'
I190926 16:50:35.663708 1 workload/workloadsql/dataload.go:135 imported users (0s, 50 rows) I190926 16:50:35.682583 1 workload/workloadsql/dataload.go:135 imported vehicles (0s, 15 rows) I190926 16:50:35.769572 1 workload/workloadsql/dataload.go:135 imported rides (0s, 500 rows) I190926 16:50:35.836619 1 workload/workloadsql/dataload.go:135 imported vehicle_location_histories (0s, 1000 rows) I190926 16:50:35.915498 1 workload/workloadsql/dataload.go:135 imported promo_codes (0s, 1000 rows)
Run the workload for 5 minutes:
$ cockroach workload run movr \ --duration=5m \ 'postgresql://root@localhost:26257?sslmode=disable'
Step 4. Access the DB Console
The CockroachDB DB Console gives you insight into the overall health of your cluster as well as the performance of the client workload.
Go to http://localhost:8080.
On the Cluster Overview, notice that three nodes are live, with an identical replica count on each node:
This demonstrates CockroachDB's automated replication of data via the Raft consensus protocol.
Note:Capacity metrics can be incorrect when running multiple nodes on a single machine. For more details, see this limitation.
Click Metrics to access a variety of time series dashboards, including graphs of SQL queries and service latency over time:
Use the Databases, Statements, and Jobs pages to view details about your databases and tables, to assess the performance of specific queries, and to monitor the status of long-running operations like schema changes, respectively.
Step 5. Simulate node maintenance
In a new terminal, gracefully shut down a node. This is normally done prior to node maintenance:
Get the process IDs of the nodes:
ps -ef | grep cockroach | grep -v grep
501 4482 1 0 2:41PM ttys000 0:09.78 cockroach start --insecure --store=node1 --listen-addr=localhost:26257 --http-addr=localhost:8080 --join=localhost:26257,localhost:26258,localhost:26259 501 4497 1 0 2:41PM ttys000 0:08.54 cockroach start --insecure --store=node2 --listen-addr=localhost:26258 --http-addr=localhost:8081 --join=localhost:26257,localhost:26258,localhost:26259 501 4503 1 0 2:41PM ttys000 0:08.54 cockroach start --insecure --store=node3 --listen-addr=localhost:26259 --http-addr=localhost:8082 --join=localhost:26257,localhost:26258,localhost:26259
Gracefully shut down node 3, specifying its process ID:
kill -TERM 4503
Back in the DB Console, despite one node being "suspect", notice the continued SQL traffic:
Restart node 3:
$ cockroach start \ --insecure \ --store=node3 \ --listen-addr=localhost:26259 \ --http-addr=localhost:8082 \ --join=localhost:26257,localhost:26258,localhost:26259 \ --background
Step 6. Scale the cluster
Adding capacity is as simple as starting more nodes with cockroach start
.
Start 2 more nodes:
$ cockroach start \ --insecure \ --store=node4 \ --listen-addr=localhost:26260 \ --http-addr=localhost:8083 \ --join=localhost:26257,localhost:26258,localhost:26259 \ --background
$ cockroach start \ --insecure \ --store=node5 \ --listen-addr=localhost:26261 \ --http-addr=localhost:8084 \ --join=localhost:26257,localhost:26258,localhost:26259 \ --background
Again, these commands are the same as before but with unique
--store
,--listen-addr
, and--http-addr
flags.Back on the Cluster Overview in the DB Console, you'll now see 5 nodes listed:
At first, the replica count will be lower for nodes 4 and 5. Very soon, however, you'll see those numbers even out across all nodes, indicating that data is being automatically rebalanced to utilize the additional capacity of the new nodes.
Step 7. Stop the cluster
When you're done with your test cluster, stop the nodes.
Get the process IDs of the nodes:
ps -ef | grep cockroach | grep -v grep
501 4482 1 0 2:41PM ttys000 0:09.78 cockroach start --insecure --store=node1 --listen-addr=localhost:26257 --http-addr=localhost:8080 --join=localhost:26257,localhost:26258,localhost:26259 501 4497 1 0 2:41PM ttys000 0:08.54 cockroach start --insecure --store=node2 --listen-addr=localhost:26258 --http-addr=localhost:8081 --join=localhost:26257,localhost:26258,localhost:26259 501 4503 1 0 2:41PM ttys000 0:08.54 cockroach start --insecure --store=node3 --listen-addr=localhost:26259 --http-addr=localhost:8082 --join=localhost:26257,localhost:26258,localhost:26259 501 4510 1 0 2:42PM ttys000 0:08.46 cockroach start --insecure --store=node4 --listen-addr=localhost:26260 --http-addr=localhost:8083 --join=localhost:26257,localhost:26258,localhost:26259 501 4622 1 0 2:43PM ttys000 0:02.51 cockroach start --insecure --store=node5 --listen-addr=localhost:26261 --http-addr=localhost:8084 --join=localhost:26257,localhost:26258,localhost:26259
Gracefully shut down each node, specifying its process ID:
kill -TERM 4482
kill -TERM 4497
kill -TERM 4503
Note:For nodes 4 and 5, the shutdown process will take longer (about a minute each) and will eventually force the nodes to stop. This is because, with only 2 of 5 nodes left, a majority of replicas are not available, and so the cluster is no longer operational.
kill -TERM 4510
kill -TERM 4622
To restart the cluster at a later time, run the same
cockroach start
commands as earlier from the directory containing the nodes' data stores.If you do not plan to restart the cluster, you may want to remove the nodes' data stores:
$ rm -rf node1 node2 node3 node4 node5
What's next?
- Install the client driver for your preferred language
- Learn more about CockroachDB SQL and the built-in SQL client
- Build an app with CockroachDB
- Further explore CockroachDB capabilities like fault tolerance and automated repair, multi-region performance, serializable transactions, and JSON support